Thread the rotor lid onto the center spindle and tighten it firmly clockwise before closing the main outer housing lid. Do not over-tighten, but ensure it is secure to maximize aerodynamic efficiency and contain potential tube failures. Initiating a Standard Run
Keep the room temperature between 15°C and 35°C for optimal cooling performance. Electrical Connections eppendorf 5402 manual
Tracks remaining run time. Setting the timer below 1 minute or above 99 minutes typically engages the continuous run mode. Thread the rotor lid onto the center spindle
Quick Guide: Operating the Eppendorf 5402 Refrigerated Microcentrifuge Overview: The Eppendorf 5402 Go to product viewer dialog for this item. Electrical Connections Tracks remaining run time
Plug the unit directly into a grounded electrical outlet matching the voltage specified on the manufacturer’s ID plate (typically 120V or 230V). Avoid using extension cords. Critical Safety Rules Never override the lid-locking mechanism. Never move the centrifuge while the rotor is spinning.
If the laboratory loses power while your samples are trapped inside the unit, do not attempt to pry the lid open with tools. Disconnect the main power plug from the wall.