Alps Electric Hidclass 10013 Updated Upd Jun 2026

Users often find it confusing that a driver dated , is offered as a "new" update in 2024 or later. There are several reasons for this:

While the main touchpad usually uses a Synaptics or standard Microsoft driver, the "stick" often requires this specific Alps driver to function correctly, allowing for features like pressure sensitivity, tap-to-click, and scroll emulation. alps electric hidclass 10013 updated

| Symptom | Possible Cause | Solution | |---------|----------------|----------| | No read, LED not blinking | Power supply issue or poor grounding | Check 5V regulator; ensure GND is common with host | | Intermittent reads | Antenna mismatch or detuning | Re-tune antenna to 125 kHz; adjust coil inductance | | Wrong card number reported | Wiegand timing mismatch | Increase inter-bit timeout to 5ms; check for signal reflections | | Module reads but lags | Old firmware version | Verify you have REV B or later; flash updated firmware from Alps | | Reads only some HID cards | Frequency drift or unsupported format | Ensure cards are Prox (not iClass or Seos); test with 26-bit default | Users often find it confusing that a driver