The Ivoclar Programat P90 is a compact, microprocessor-controlled furnace that offers a range of features for the processing of dental ceramics and metals. Some of its key features include:
Perform a silver wire calibration test to verify temperature accuracy. ivoclar programat p90 manual fixed
Post-Reset Step: You must re-run the calibration program (Calib) using a reference furnace (or send to a technician). Do not press ceramics immediately after a reset. Do not press ceramics immediately after a reset
If your ceramic shades are consistently coming out too chalky (under-fired) or rounded and shiny (over-fired), your thermocouple requires manual calibration using the classic silver wire test. Step 1: Prepare the Calibration Matrix The furnace turns on, but the chamber fails
The length of time the porcelain remains at peak temperature.
The furnace turns on, but the chamber fails to heat up, or the temperature fluctuates wildly during the cycle.